Very pleased with manual except that a few more details in the drawings might make the job (not yet done, tut-tut) easier. Should be adequate though. Actually I didn't have to pay for this anyway as I was given credit for another item that wasn't quite complete. Good service, then.
Hi - happy with what I received but not quite what I wanted - my fault I assumed that service manual would also include operational instructions which is what I needed - all I needed to know was how to turn the radio - thanks
Text excerpt from page 67 (click to view)
<Notes> 1. When installing the clutch, align the end face of the clutch to the shaft groove and align the hexagonal screw to the milling cutting surface. Insert the projection of the clutch and the gear arm in the hole of the bracket. 2. Confirm that there is no oil, etc. on the surface of the paper feed roller or the separation pad. 3. When reassembling the timing belt (removed when taking cut the pick-up roller) pass it through the upper side of the belt tensioner. 4. When installing the separation pad bracket to the copier, first free the paper stop lever by pushing down the pick-up roller downwards.
Note 1: Note 1: Put the projection Put the into the bracket hole into the
Note 1: 1: Put the projection into the he projection into the bracket hole ket hole