There are currently no product reviews.
Fast, clear and useful. Important for me: the manual is in German.
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
very good quality readable manual,printed off very well.
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
PROGRAMMING CHANNEL MEMORY
â¢ First, use the ASM (Automatic Search Memory) function to preset all the active channels in your area automatically. Then, arrange the preset channels with the SEARCH (>>>), MFT (Manual Fine Tuning) and AFT (Auto Fine Tuning) functions so that you can tune into only desired channels. â¢ This section shows how to tune in channels using mainly the Remote Controller. You can also perform the system select, ASM, SEARCH (>>>), SKIP, MFT and AFT operations using the buttons on the TV set.
To preset channels (ASM)
To preset channels (Manual search, AFT, MFT)
Manual search (>>>)
ASM (Automatic Search Memory)
1 2 3
SPECIFIC INFORMATIONS GENERAL ADJUSTMENTS
with the position down ( )/up ( ) buttons or the digit/ Select the head of the position number to start the ASM direct select buttons. Press the MENU button repeatedly to call up the SET UP menu on the screen.
1 2 3 4
Select a position number with the position down ( up ( ) or digit/direct select buttons.
Press the MENU button repeatedly to call up the SET UP menu on the screen.
Confirm that âCOLORâ is set to âAUTOâ and âSOUNDâ is set to proper system. If not, press the t/s buttons to move the cursor (-) to âCOLORâ or âSOUNDâ and press the â/+ buttons to select each proper system.
Press the t/s buttons to move the cursor (-) to â>>>â.
Press the t/s buttons to move the cursor (-) to âASMâ. Press the "+" button to start the ASM. All active channels will be stored in the memory automatically. When programming is complete, the initial position number will reappear.
Press the â/+ buttons to start searching. The â button searches for lower-numbered channels; the + button for higher- numbered channels. Repeat this process until you can get the desired channel.
5 6 7
When the desired programme is shown, press the t/s buttons to move the cursor (-) to â â.
After presetting Check the preset channels by pressing the position down ( )/ up ( ) buttons. â¢ If the picture or sound of a certain channel is not good, finetune the channel using the MFT function. â¢ If the colour of a certain channel is abnormal, automatic colour system selection (AUTO) may malfunction, or sound system selection is wrong. In such a case, select another colour and/or sound system.
Press the + button to memorize the channel at the current postion.
When you desire to store another channel at another postion, move the cursor (-) to âPOSITIONâ with the t/s buttons and select a desired position with the â/+ buttons. Then, press the t/s buttons to move the cursor (-) to â>>>â and repeat the steps 4 to 7.
â 18 â