|
Who's Online
There currently are 5643 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
;
Great Service Manual, Very Complete, as advertised, Perfect, Thanks!
ELECTRICAL ADJUSTMENTS
2-13: TINT 1. Receive the NTSC color bar pattern. (Audio Video Input) 2. Using the remote control, set the brightness and contrast to normal position. 3. Connect the oscilloscope to TP024. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (20) on the remote control to select "TINT". 5. Press the VOL. +/- button on the remote control until the section "A" becomes a straight line. (Refer to Fig. 2-2) 2-15: Confirmation of Fixed Value (Step No.) Please check if the fixed values of the each adjustment items are set correctly referring below. NO. FUNCTION 02 04 06 07 09 10 18 19 20 21 23 24 26 27 30 Fig. 2-2 2-14: CONTRAST CENT 1. Activate the adjustment mode display of Fig. 1-1 and press the channel button (22) on the remote control to select "CONTRAST CENT". 2. Press the VOL. +/- button on the remote control until 3. 4. 5. the contrast step No. becomes "35". Receive a broadcast and check if the picture is normal. Set to the AV mode. Activate the adjustment mode display of Fig. 1-1 and press the channel button (22) on the remote control to select "CONTRAST CENT". Press the VOL. +/- button on the remote control until the contrast step No. becomes "44". Receive a broadcast and check if the picture is normal. 31 32 33 34 35 36 37 38 AGC GAIN R CUTOFF G CUTOFF B DRIVE V POSI (50) V POSI (60) BRIGHT MAX BRIGHT MIN TINT SHARP CONTRAST MAX CONTRAST MIN COLOR MAX COLOR MIN M B CUT OFF CVBS OUT APR THRESHOLD BELL FILTER BANDPASS H POSI OSD V POSI OSD H POSI TEXT V POSI TEXT RF 00 00 00 45 08 00 40 09 32 04 50 10 50 10 127 31 00 05 00 118 50 122 58 AV ------------40 09 ADJ. 04 50 10 50 10 -------------------
"A"
* To check for the fixed values of the RF (60Hz), indicate the adjustment mode screen while input the 60Hz video signal.
6. 7.
D-3
|
|
|
> |
|