Fast Download,all pages present,an excellent copy.THis enabled to find the origional part numbers and chase them up. The cartridge is proving difficult to find but at least I know the origional part number.Thanks to all.
The manual was as described. Complete with parts list and technical information. Fast delivery.
Text excerpt from page 15 (click to view)
9. CWI/NDC Adjustment
(Base value --> CWI: 160, NDC: 12)
9-4. NDC Adjustment
NDC Mode is for compensating the deviation of each Lamp. Adjust Left/Right value with using CH UP/DOWN key on the Remote Controller to set an uniformity for White color.
9-1. Required Test Equipment
9-2. Preparation for Adjustment
(1) Connect power and turn the TV set on. (2) Enter to CWI/NDC.
Starting point of noise (Appearance GREEN)
<Fig. 10> TEST Pattern The sensitivity of sensor may vary due to the temperature. Thus it may cause color changed bacause of the color wheel angle changed. <Fig. 8> TEST Pattern(Lamp Gray Pattern)
(1) Using the channel key, adjust CWI-Pat.1 to the left/right. (2) During adjustment, check the appearance of noise in the TEST Pattern. Set the value to reduce green noise in step 3~4. (3) Using CH UP/DOWN key of the Remote Controller, enter the RED PATTERN. (4) Check the uniformity of RED Pattern to verify.