The Service Manual received was helpful. The electronic information is exactly what I needed.
Text excerpt from page 14 (click to view)
1-2-4. Front (R), Front (L) and Jack PC Board (1) Remove the top cover. (Refer to item 1-1-1.) (2) Remove front panel. (Refer to item 1-1-2.) (3) Remove two pieces of tape (1). (4) Remove six screws (2), four claws and the stay (3). (5) Remove three screws (4) to remove the front (R) PC board (5). (6) Remove two screws (6) to remove the front (L) PC board (7). (7) Remove four screws (8) to remove the jack PC board (9). (Note) After replacing, tape on two points (1) as they were.
Stay (3) Front (L) board (7) Screws (8) Jack PC board (9) Tape (1) Screws (2) Screws (6) Tape (1) Claws Screws (4)