|
Who's Online
There currently are 5729 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The service manual is as described and received the link to the download sooner than expected. Great service, quality product. This site is a big help in the electronics repair business.
;
Il service manual molto accurato. Rapidi nella risposta
;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
FLOW CHART NO.12 EV+3.3V is not outputted. Is 5V voltage supplied to the collector of Q1159? Yes Is the voltage of approximately 4V supplied to the base of Q1159? Yes Replace Q1159. No No Check D1108, L1105, C1120 and their periphery, and service it if defective. Check IC1153 and their periphery, and service it if defective.
FLOW CHART NO.13 P-ON+2.5V is not outputted. Is 4V voltage supplied to Pin(1) of IC1151? Yes Replace IC1151. No Check D1105, C1110 and their periphery, and service it if defective.
FLOW CHART NO.14 P-ON+3.3V is not outputted. Is 5V voltage supplied to Pin(1) of IC1152? Yes Replace IC1152. No Check D1108, L1101, C1114, C1116 and their periphery, and service it if defective.
FLOW CHART NO.15 The fluorescent display tube does not light up. No Is 3.3V voltage supplied to Pin(6, 24) of IC1503? Yes Is approximately -24V to -28V voltage supplied to Pin(15) of IC1503? Yes Is there approximately 500kHz oscillation to Pin(26) of IC1503? Yes Are the filament voltage applied between (1) and (24) of the fluorescent display tube? Also negative voltage applied between these pins and GND? Yes Replace the fluorescent display tube. No Check the -FL line and service it if defective. No Check the EV+3.3V line and service it if defective.
Check R1560, IC1503 and their periphery, and service it if defective. Check the power circuit, D1101, D1112, C1106 and their periphery, and service it if defective.
No
1-8-3
E7B71TR
|
|
|
> |
|