|
Who's Online
There currently are 5825 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
El producto satisface las necesidades del servicio t
;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
ELECTRICAL ADJUSTMENTS
2-20: SUB TINT CENTER 1. Receive the color bar pattern. (RF Input) 2. Using the remote control, set the brightness, contrast, color and tint to normal position. 3. Connect the oscilloscope to TP803. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (12) on the remote control to select "TNTC". 5. Press the RIGHT/LEFT button on the remote control until the waveform becomes as shown in Fig. 2-2. 6. Receive the color bar pattern. (Audio Video Input) 7. Press the INPUT SELECT button on the remote control to set to the AV mode. 8. Using the remote control, set the brightness, contrast, color and tint to normal position. 9. Activate the adjustment mode display of Fig. 1-1 and press the channel button (43) on the remote control to select "TNTCA". 10. Press the RIGHT/LEFT button on the remote control until the waveform becomes as shown in Fig. 2-2. 11. Press the TV/DVD button on the remote control to set to the DVD mode. 12. Activate the adjustment mode display of Fig. 1-1 and press the channel button (55) on the remote control to select "TNTCD". 13. Press the RIGHT/LEFT button on the remote control until the waveform becomes as shown in Fig. 2-3. 2-21: SUB COLOR CENTER 1. Receive the color bar pattern. (RF Input) 2. Using the remote control, set the brightness, contrast, color and tint to normal position. 3. Connect the oscilloscop to TP801. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (09) on the remote control to select "COLC". 5. Adjust the VOLTS RANGE VARIABLE knob of the oscilloscope until the range between white 100% and 0% is set to 4 scales on the screen of the oscilloscope. 6. Press the RIGHT/LEFT button on the remote control until the red color level is adjusted to 120 ± 5% of the white level. (Refer to Fig. 2-4) 7. Receive the color bar pattern. (Audio Video Input) 8. Press the INPUT SELECT button on the remote control to set to the AV mode. 9. Using the remote control, set the brightness, contrast, color and tint to normal position. 10. Activate the adjustment mode display of Fig. 1-1 and press the channel button (40) on the remote control to select "COLCA". 11. Adjust the VOLTS RANGE VARIABLE knob of the oscilloscope until the range between white 100% and 0% is set to 4 scales on the screen of the oscilloscope. 12. Press the RIGHT/LEFT button on the remote control until the red color level is adjusted to 120 ± 5% of the white level. (Refer to Fig. 2-4) 13. Press the TV/DVD button on the remote control to set to the DVD mode. 14. Activate the adjustment mode display of Fig. 1-1 and press the channel button (52) on the remote control to select "COLCD". 15. Press the RIGHT/LEFT button on the remote control to increase the step numbers by 3 steps to the AV. White 0% Fig. 2-2 0%
100% White 100% Red Level Fig. 2-3
Fig. 2-4
|
|
|
> |
|