|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
FAST very good and clear a great unexpensive job!!! very recomended for all people who are preofessional or hobbists as me!!!!!!
;
Thank you very much for this Service Manual, it helped us a lot to repair the M-4318!
...BUT: The parts list is missing and the free parts katalog on web isn't complete, so now we don't know the part numbers of the defect parts :(
We had to build them out of a working machine, and need the numbers to reorder the missing parts now.
;
Very good manual with clear electrical diagrams. Thanks owner-manuals.
;
Great manual, thank you, sony kp46s3 service manual perfectly, i am very happy.
;
Complete original Service Manual in good (scan) quality!
DISASSEMBLY INSTRUCTIONS
2-16: CAPSTAN DD UNIT (Refer to Fig. 2-16) 1. Remove the Capstan Belt. 2. Remove the 3 screws 1. 3. Remove the Capstan DD Unit.
Spring Position
Fig. 2-13-B
Capstan Belt Capstan DD Unit
2-14: FE HEAD (RECORDER ONLY) (Refer to Fig. 2-14) 1. Remove the screw 1. 2. Remove the FE Head.
1
FE Head
1 1
� Screw Torque: 5 ± 0.5kgf�cm
1
Fig. 2-16
� The FE Head is not installed on the Video Cassette Player. � Screw Torque: 4 ± 0.5kgf�cm
2-17: MIDDLE GEAR/MAIN CAM (Refer to Fig. 2-17-A) Fig. 2-14 1. Remove the Polyslider Washer 1, then remove the Middle Gear. 2. Remove the E-Ring, then remove the Main Cam, P5 Cam, Pinch Roller Cam and Joint Gear.
1
Middle Gear E-Ring Main Cam
2-15: AHC ASS'Y/CYLINDER UNIT ASS'Y (Refer to Fig. 2-15) 1. Unlock the support 1 and remove the AHC Ass'y. 2. Remove the 3 screws 2. 3. Remove the Cylinder Unit Ass'y. NOTE When you install the Cylinder Unit Ass'y, tighten the screws from (1) to (3) in order while pulling the Ass'y toward the left front direction.
Pinch Roller Cam Joint Gear P5 Cam
AHC Ass'y
Cylinder Unit Ass'y
1
Fig. 2-17-A NOTE When you install the Pinch Roller Cam, P5 Cam and Main Cam, align each marker. (Refer to Fig. 2-17-B)
Pinch Roller Cam
2 (1)
(2) 2 � Screw Torque: 3 ± 0.5kgf�cm
2
(3)
Check the hole of Main Chassis can be seen.
P5 Cam
Fig. 2-15
Marker
Main Cam
Fig. 2-17-B
|
|
|
> |
|