Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
Text excerpt from page 30 (click to view)
(2) Press [Yes] button.
2. When LCD Panels are exchanged. Step1. Adjust the VCOM data (front and celing) . This adjustment makes the flicker of a panel into the minimum. Step2. Adjust the Shading data. Step3. Set the new data to the Projector.
2-1 Adjust the VCOM data
(3) Input file name and press [Open] button.
(1) Select [Built in Signal] from [Check] menu. This menu can output the signal pattern built in the projector.
1-4 Set the shading data to the projector (1) Select [set] from [Projector] menu.
(2) Set the color level and press [OK] button (When you adjust Red VCOM, set red level 100%.)
(2) Select commucation port and press [Go] button. After setting press [Close] button.
(3) Select [Vcom] from [Check] menu.
(3) If you save data to the projector press [Yes] button.