TOSHIBA V-754TSB
Service Manual

RECORDING

o Some noise can be expected at end of the edit When you have finished recording, press STOP (s).

8
Connect VTR, from which cassette is be copied, to the Adjusting Picture Alignment Manually of your VTR. Insert a blank cassette in your VTR.
DISPLAY

before the original recording resume.

Recording from Another VTR or Camcorder

COUNT.RST

appropriate SCART audio and video input connectors on the rear

1
The Picture Alignment feature allows you to adjust the alignment manually by pressing TRK (i or j) buttons until the picture is clear and stable. Result : The tracking bar appears. The image is adjusted. The tracking bar disappears when you release the button.
COUNT.RST F.ADV CLR/RST

F.ADV CLR/RST

manually to obtain the best possible picture.

2 When noise bars or streaks appear during playback, adjust alignment

CURSOR

As each VTR is different, slight adjustments need to be made in the

(V-644UKV-634UK/V-254UK/ best possible picture and sound; Digital Auto Tracking. The �AUTO�

way the tape read. This is called �Tracking�. When playback starts video recorder automatically adjusts Tracking to obtain the Insert pre-recorded cassette in the other video source (VTR or

playback picture and sound may be distorted. The VTR will

OK

camcorder). indicator will flash while this adjustment takes place and the
V-244UK/V-234UK)

3 4
o AUX for RCA input (V754UK/V644UK/V254UK/ adjust the Tracking manually. Press I.SELECT button to select the appropriate input on your automatically adjust the Tracking as best it can. If you playback occasionally find that the Digital Auto Tracking is not able to

AUDIO

video source, such as another VTR a camcorder. o AV1 or AV2 for SCART input. improve the picture sufficiently. In these instances you will need to

You : can copy a cassette to your VTR from another

rented or tapes recorded on other machines, you may

Note : It is an infringement of copyright laws to V244UK). With a tape in and playing, hold down either the TRK (i or j) copy prerecorded cassettes or to re-record them any button on remote control until best possible picture and Start playing back the cassette to be copied. (V-754UK)

sound is obtained from without permission owners of the performance. if you press PAUSE/STILL button the image may

corresponding copyright.

If tape is old or worm, it may be impossible to improve the picture

34 35

5 6 Press the two REC buttons to start recording on your VTR. 7 When you have finished recording, press STOP (s) on both VTRs. shimmer. This can also be reduced by adjusting the Tracking.

RECORDING

2-16
Insert the cassette to be edited in your VTR. Switch on both the television and your VTR.

66

Reference Information

RECORDING BASIC OPERATION

Advance Recording Feature continued Playing back
1 1
Insert video cassette to be played. If safety tab on the cassette is intact, press PLAY (�). Press the PLAY (�) button to start playback. CURSOR

This function allows you to start new recording at specific position on the cassette while maintaining a very smooth scene change. This function allows you to play back any pre-recorded cassette.

Using the Assemble Edit Function Playing a Cassette

COUNT.RST

2 2
automatically. NTSC tapes can be played back but
VIDEO Plus+ AUDIO

F.ADV CLR/RST

When reach position from which you wish to start new Otherwise, the cassette is played automatically. optimized automatically to reduce disturbance (Digital
(V644UK/V634UK/V254UK/ tape reached, the cassette is rewound V244UK/V234UK)

3
Press F.ADV button often as necessary to advance frame by Auto Tracking). When playing a cassette, if the end of

recording , press PAUSE/STILL (��) button. OK Note : When a cassette loaded. the tape position is

frame, until the exact recording position is located.

4 5 6 3
o The I.SELECT button for the AV1, AV2 or AUX input sources. Note: (V754UK) Eject the cassette (EJECT).

CURSOR

While VTR is in still mode, press the two REC buttons to activate cannot be recorded with this VTR.

the assemble Edit function.

OK

AUDIO

Select the source from which you wish to record by pressing: To.. Then pres...

o The CH (i or j) buttons for television channels. Stop the playback s (STOP).

w

o A smooth edited scene will only be achieved if

there are of the same video system.

7

Press the PAUSE/STILL (��) button to start recording.

Toshiba