I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
The item received was as described, as expected. I was pleased with the order. Thank you.
Text excerpt from page 16 (click to view)
This set-up will enable you to:
� watch an unscrambled or scrambled channel while recording it. � record any channels through the cable box.
Cable Box
You will need to:
OUT
IN
� set TV channel 3 or 4 to receive video signals. (See page 11.) � set VCR channel to the output channel of the cable box, and select a desired cable channel on the cable box. � while the VCR is turned off or the �VCR� indicator is not lit in the VCR display, set TV channel to the output channel of the cable box.
A
A B
A/B switch
This set-up will enable you to:
� watch an unscrambled or scrambled channel while recording it. � record an unscrambled channel while watching another unscrambled channel (only when you connect a cable-compatible TV). � A/B switch �A�: record and watch an unscrambled channel which comes bypassing the cable box. � A/B switch �B�: record and watch a scrambled or unscrambled channel coming through the cable box.
B
Cable Box
PREPARATION
Cable Box
This set-up will enable you to:
� watch or record a channel through the cable box via the LINE IN 1 (AUDIO/VIDEO) jacks.
You will need to:
� press I.SELECT so that the VCR display shows �L1�.